Pneumatic Industrial Blast Pot Pressure Tank With Two Guns Used In Blast Room
Introduction
TS Machinery portable blast machines are designed for high-performance, versatile blast cleaning.
Whether removing contamination, corrosion, paint, mill scale or other coatings from surfaces, the TS Machinery blast pot is unparalleled in the industry. By combining high production with quality components and precision factory assembly, TS offers the finest sand blasting equipment available.
The rugged cast iron abrasive regulator combines the blasting media and high velocity air to provide maximum cleaning speeds and uniform surface texture and profile for improved bonding of coatings.
Specification
| Tank Diameter | Φ900mm |
| 1Tank Height | 2200mm |
| Tank Volume | 1m³ |
| Air Consumption(approximately) | ≥6m³/min |
| Working Efficiency(single gun) | About 35 -40min |
| Air Pressure | 0.4-0.7MPa |
| Control Mode | Pneumatic Control |
| Sand blasting nozzle | 2 pcs |
| Nozzle Diameter(boron carbide nozzle) | Φ8mm |
| Sand blasting hose | DN25(Standard Configuration:10m) |
| Air Source hose | DN32 |
| Weight (approximately) | 500Kg |
Purpose
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.
Requirements for Operation
- Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle.
- Minimum of 58 psi(4 bar) is needed to close the pop-up valve and pressurize the blast machine. Required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
- Good Breathing Air Supply
- Abrasive blast media specifically manufactured for abrasive blasting and appropriate for your application.
- Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
Advantages
- A normally closed system designed for the glass etching/carving industry that enables the operator to have a quick on/off control at the nozzle.
- Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
- Abrasive metering valve maintains smooth, consistent, adjustable media flow.
- Approved respirator with Blast helmet comfort-fit suspension.
- One-man portable industrial-quality blast machines manufactured.
- Small in space occupation
Package
Product Tags:
|
|
Two Guns Industrial Blast Pot 0.4 - 0.7MPa Air Pressure Versatile For Blast Room Images
|
